Installation & Licensing Center
ERROR - An Unexpected Error (SIG$SEGV) Has Occurred
Authored by Caleb Scharf
October 26th, 2026
11549 views
5 likes
KB2202787
ERROR
Ansys Mechanical stops during a solve with a SIG$SEGV error like the one below. The error happens intermittently.

***ERROR *** CP = 64.031 TIME= 09:52:21
An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data
has been corrupted. ANSYS is unable to recover and will terminate.
Previously saved files are unaffected. Please send the data leading
to this operation to your technical support provider, as this will allow ANSYS, Inc to improve the program.
Current ANSYS Traceback: cdsfpr cdload loadhiswrite solvcl ANSYS
Software & Version
Ansys Mechanical 2021 R2
*This documented instance of this error occurred in this version but is not necessarily limited to this version.
Description/Cause
SIG$SEGV errors come from a problem between Ansys and the computer's software or hardware. Four separate problems can cause this error. They're listed in the order to rule them out, least disruptive first:
- Cause A - Corrupt model
- Cause B - Failing hardware, such as memory (RAM) or the hard drive
- Cause C - Corrupt Windows operating system
- Cause D - Corrupt Ansys installation
In this documented instance, the model solved on other computers and sometimes on the affected computer. That pointed away from the model and toward the computer itself. The cause was failing memory (RAM).
*The cause(s)/solution(s) we identified in this documented instance may not be the only cause(s)/solution(s) for this error.
Solution
Work through the solutions in order. Each one rules out one cause.
Solution to Cause A - Corrupt Model
- Solve the model on another computer that has the same version of Ansys.
- Check the result:
- If the model solves: the model isn't the cause. Continue to Solution to Cause B.
- If the model fails with the same SIG$SEGV error: the model is likely corrupt.
Solution to Cause B - Failing Hardware
- If your computer is a Dell, run the built-in diagnostics: HOW TO - Run Dell Hardware Diagnostics.
- Test your memory (RAM): How to Test Your Computer's RAM for Problems (howtogeek.com).
- Check your hard drive's health: How to Check Your Hard Drive’s Health With CrystalDiskInfo (silicophilic.com).
Tell the reader what to do when a hardware test reports a fault. This instance was fixed by replacing failing memory.
Solution to Cause C - Corrupt Windows Installation
- Check and repair Windows: Check & Repair Windows Installation Health.
Verify the Fix Worked
- After each solution, solve the model again on the affected computer.
- If the solve finishes without the SIG$SEGV error, you're done. If the error comes back, continue with the next solution.